session-tools/bin/rclaude

#!/bin/sh
# rclaude — durable Claude Code sessions, local or remote.
#
# Two layers of resilience:
#   1. tmux on <host> survives terminal/transport drops.
#   2. `claude --continue` resumes the per-directory session from disk after
#      the host itself dies (reboot, crash, OOM).
#
# Each invocation starts a fresh Claude session in a new named tmux window.
# To reattach an existing session: `rclaude resume [pattern]`
# To resume a Claude conversation from disk after host loss: `rclaude resume` picks
# up the on-disk session via `claude --continue`.
#
# Permission mode: --dangerously-skip-permissions is on by default. Override
# with RCLAUDE_PERMS=default (or any --permission-mode value).
#
# Hosts scanned by `list`/`resume` default to: local + apricot + plum (the
# non-local one is dialed; the local one is rendered as "local"). Override
# with RCLAUDE_HOSTS="apricot black quinn-vps".
#
# Usage:
#   rclaude                                  # local, $PWD
#   rclaude .                                # local, $PWD
#   rclaude <host>                           # remote: $PWD mirrored under remote $HOME
#   rclaude <host> .                         # same as above (explicit form)
#   rclaude <host> <dir>                     # remote (or local) at <dir>
#   rclaude list                             # tmux + per-project disk view
#   rclaude list sessions                    # tmux + per-session disk view (uuid + snippet)
#   rclaude triage [--limit N] [--refresh]   # Haiku-powered ranked summary of recent sessions
#                                            # (uses claude-code-batch-sdk + content cache)
#   rclaude resume                           # picker: live tmux + most-recent disk (--- separator,
#                                            # deduped by uuid across hosts)
#   rclaude resume [pattern] --on <host>     # mirror picked session onto <host> (rewrites cwd via
#                                            # $HOME-relative mirror) and resume there
#   rclaude resume [pattern]                 # reattach / resume by uuid prefix, snippet,
#                                            # tmux name, or cwd substring (interactive
#                                            # picker on >1 match)
#
# Config file: $XDG_CONFIG_HOME/rclaude/config (defaults to ~/.config/rclaude/config).
# A plain shell fragment sourced at startup. Useful settings:
#   RCLAUDE_TRIAGE=auto             # auto-rank sessions in `resume` (default: off)
#   RCLAUDE_TRIAGE_MODEL=haiku      # Claude model for triage
#   RCLAUDE_TRIAGE_LIMIT=100        # max sessions to triage per host
#   RCLAUDE_TRIAGE_CONCURRENT=4     # concurrent claude subprocesses
#   RCLAUDE_TRIAGE_BATCH=8          # sessions per claude CLI call
#   RCLAUDE_HOSTS="apricot plum"    # hosts to scan
#
# Mirror semantics: if local $PWD is $HOME/X/Y, the remote dir defaults to
# ~/X/Y on the remote (the remote's $HOME, not $HOME from this machine).
# If $PWD is outside $HOME, falls back to the remote's $HOME.

set -eu

# Load user config if present. Lets the user set RCLAUDE_TRIAGE=auto (and
# friends) once instead of exporting on every invocation. Config file is a
# plain shell fragment sourced into the current shell.
if [ -r "${XDG_CONFIG_HOME:-$HOME/.config}/rclaude/config" ]; then
    # shellcheck disable=SC1090
    . "${XDG_CONFIG_HOME:-$HOME/.config}/rclaude/config"
fi

# ---------------------------------------------------------------------------
# Helpers
# ---------------------------------------------------------------------------

# Resolve $0 to its real path, correctly handling relative symlinks at each hop.
resolve_self() {
    _rs=$0
    while [ -L "$_rs" ]; do
        _link=$(readlink "$_rs")
        case "$_link" in
            /*) _rs="$_link" ;;
            *)  _rs="$(dirname "$_rs")/$_link" ;;
        esac
    done
    printf '%s' "$_rs"
}

is_local() {
    case $1 in
        local|localhost|127.0.0.1|::1) return 0 ;;
    esac
    [ "$1" = "$(hostname)" ] && return 0
    [ "$1" = "$(hostname -s 2>/dev/null)" ] && return 0
    return 1
}

# List claude-* tmux sessions on a host. Output one row per session:
#   <host>\ttmux\t<session_name>\t<detail_from_tmux_ls>
list_tmux_on() {
    _host=$1
    if is_local "$_host"; then
        command -v tmux >/dev/null 2>&1 || return 0
        _raw=$(tmux ls 2>/dev/null || true)
    else
        _raw=$(ssh -o BatchMode=yes -o ConnectTimeout=3 "$_host" 'tmux ls 2>/dev/null' || true)
    fi
    # tmux ls lines look like:  claude-foo: 1 windows (created ...) [80x24]
    printf %s "$_raw" | awk -v host="$_host" '
        /^claude-/ {
            name=$1; sub(/:$/, "", name);
            $1="";
            sub(/^[[:space:]]+/, "");
            printf "%s\ttmux\t%s\t%s\n", host, name, $0
        }
    '
}

# List on-disk Claude project sessions on a host (via _claude-projects helper).
# Output one row per project:
#   <host>\tdisk\t<cwd>\t<sessions=N, last used <relative-time>>
list_disk_on() {
    _host=$1
    _helper_dir=$(dirname "$(resolve_self)")
    if is_local "$_host"; then
        _raw=$("$_helper_dir/_claude-projects" 2>/dev/null || true)
    else
        # Send the helper over stdin so we don't depend on a pre-installed copy
        # on the remote (and to dodge quoting issues).
        _raw=$(ssh -o BatchMode=yes -o ConnectTimeout=3 "$_host" 'python3 -' < "$_helper_dir/_claude-projects" 2>/dev/null || true)
    fi
    _now=$(date +%s)
    printf %s "$_raw" | awk -F'\t' -v host="$_host" -v now="$_now" '
        function rel(secs,   abs, s) {
            abs = (secs < 0) ? -secs : secs
            if (abs < 60)         s = abs " seconds"
            else if (abs < 3600)  s = int(abs/60) " min"
            else if (abs < 86400) s = int(abs/3600) " hours"
            else                  s = int(abs/86400) " days"
            return s " ago"
        }
        NF >= 3 {
            printf "%s\tdisk\t%s\tsessions=%s, last used %s\n", host, $2, $3, rel(now - $1)
        }
    '
}

# List on-disk Claude sessions per UUID on a host (via _claude-projects --sessions).
# Output one row per session jsonl:
#   <host>\tsession\t<uuid>\t<snippet>\t<cwd> · <relative-time>
list_sessions_on() {
    _host=$1
    _helper_dir=$(dirname "$(resolve_self)")
    if is_local "$_host"; then
        _raw=$("$_helper_dir/_claude-projects" --sessions 2>/dev/null || true)
    else
        _raw=$(ssh -o BatchMode=yes -o ConnectTimeout=3 "$_host" 'python3 - --sessions' < "$_helper_dir/_claude-projects" 2>/dev/null || true)
    fi
    _now=$(date +%s)
    printf %s "$_raw" | awk -F'\t' -v host="$_host" -v now="$_now" '
        function rel(secs,   abs, s) {
            abs = (secs < 0) ? -secs : secs
            if (abs < 60)         s = abs " seconds"
            else if (abs < 3600)  s = int(abs/60) " min"
            else if (abs < 86400) s = int(abs/3600) " hours"
            else                  s = int(abs/86400) " days"
            return s " ago"
        }
        NF >= 3 {
            snippet = ($4 == "" ? "(no user text)" : $4)
            # col 6 = raw mtime, hidden — used for cross-host dedup/sort.
            printf "%s\tsession\t%s\t%s\t%s · %s\t%s\n", host, $2, snippet, $3, rel(now - $1), $1
        }
    '
}

# Combined enumeration: tmux first (live), then on-disk per-project.
list_all_on() {
    list_tmux_on "$1"
    list_disk_on "$1"
}

# Resume-search enumeration: tmux + per-session UUIDs/snippets.
list_search_on() {
    list_tmux_on "$1"
    list_sessions_on "$1"
}

# Filter list_sessions_on output to the rows whose uuid is in <uuid_list>
# (newline-separated). Centralizes the regex-build + lookup.
_filter_sessions_to_uuids() {
    _host=$1; _uuids=$2
    [ -z "$_uuids" ] && return 0
    _re=$(printf '%s\n' "$_uuids" | sort -u | grep -v '^$' | tr '\n' '|' | sed 's/|$//')
    [ -z "$_re" ] && return 0
    CLAUDE_PROJECTS_LIMIT=5000 list_sessions_on "$_host" \
        | awk -F'\t' -v r="^($_re)$" '$3 ~ r'
}

# Build a `host\tuuid\tname` table of every session that has a display name
# set via `claude -n <name>`. Used to enrich the resume picker so names show
# next to each row.
build_name_map() {
    _py='import json, os, glob
for f in glob.glob(os.path.expanduser("~/.claude/sessions/*.json")):
    try: d = json.load(open(f))
    except Exception: continue
    sid  = d.get("sessionId") or ""
    name = d.get("name") or ""
    if sid and name: print(f"{sid}\t{name}")'
    scan_hosts | while IFS= read -r _h; do
        if is_local "$_h"; then
            python3 -c "$_py" 2>/dev/null
        else
            ssh -o BatchMode=yes -o ConnectTimeout=3 "$_h" "python3 -" 2>/dev/null <<PYEOF || true
$_py
PYEOF
        fi | awk -F'\t' -v host="$_h" '{print host "\t" $1 "\t" $2}'
    done
}

# Cheap match by session display name (the `claude -n <name>` label, stored in
# ~/.claude/sessions/<pid>.json). Single ssh round-trip. Always included in
# pattern searches because the file count is bounded (one per active pid).
name_search_on() {
    _host=$1; _pat=$2
    _q=$(printf %s "$_pat" | sed "s/'/'\\\\''/g")
    _py='import json, os, sys, glob
pat = os.environ.get("RCLAUDE_PAT", "").lower()
if not pat: sys.exit(0)
for f in glob.glob(os.path.expanduser("~/.claude/sessions/*.json")):
    try: d = json.load(open(f))
    except Exception: continue
    name = (d.get("name") or "").lower()
    sid  = d.get("sessionId") or ""
    if pat in name and sid: print(sid)'
    if is_local "$_host"; then
        _uuids=$(RCLAUDE_PAT="$_pat" python3 -c "$_py" 2>/dev/null || true)
    else
        _uuids=$(ssh -o BatchMode=yes -o ConnectTimeout=5 "$_host" \
            "RCLAUDE_PAT='$_q' python3 -" 2>/dev/null <<PYEOF || true
$_py
PYEOF
)
    fi
    _filter_sessions_to_uuids "$_host" "$_uuids"
}

# Grep the full content of every Claude session JSONL on <host> for <pat>.
# Expensive — only used as the final fallback when cheap searches return nothing.
deep_search_on() {
    _host=$1; _pat=$2
    _q=$(printf %s "$_pat" | sed "s/'/'\\\\''/g")
    if is_local "$_host"; then
        _uuids=$(grep -l -F -i -- "$_pat" "$HOME/.claude/projects/"*/*.jsonl 2>/dev/null \
                 | awk -F/ '{print $NF}' | sed 's/\.jsonl$//')
    else
        _uuids=$(ssh -o BatchMode=yes -o ConnectTimeout=5 "$_host" \
            "grep -l -F -i -- '$_q' \$HOME/.claude/projects/*/*.jsonl 2>/dev/null \
             | awk -F/ '{print \$NF}' | sed 's/\\.jsonl\$//'" 2>/dev/null || true)
    fi
    _filter_sessions_to_uuids "$_host" "$_uuids"
}

# Get $HOME on <host> (cached per host in /tmp for the life of this shell).
get_home() {
    _h=$1
    _cache="/tmp/rclaude-home.$(whoami).$(printf %s "$_h" | tr -c 'A-Za-z0-9' '_')"
    if [ -s "$_cache" ]; then
        cat "$_cache"; return
    fi
    if is_local "$_h"; then
        _v=$HOME
    else
        _v=$(ssh -o BatchMode=yes -o ConnectTimeout=3 "$_h" 'printf %s "$HOME"' 2>/dev/null || true)
    fi
    [ -n "$_v" ] && printf '%s' "$_v" > "$_cache" && printf %s "$_v"
}

# Compute Claude's project-slug from a cwd path. Claude replaces every
# non-alphanumeric character with `-` (so `/` and `@` both become `-`).
#   /Users/natalie/Code/@projects/@lilith → -Users-natalie-Code--projects--lilith
claude_slug() {
    printf %s "$1" | sed 's|[^A-Za-z0-9]|-|g'
}

# Dedupe session rows (col 2 == "session") across hosts by UUID (col 3),
# keeping the row with the highest mtime (col 6). Output sorted desc by mtime.
dedupe_sessions() {
    awk -F'\t' 'BEGIN{OFS=FS}
        { if (!($3 in mt) || $6+0 > mt[$3]) { mt[$3]=$6+0; row[$3]=$0 } }
        END { for (u in row) print row[u] }
    ' | sort -t"$(printf '\t')" -k6,6nr
}

# Mirror a session JSONL from <src_host>'s ~/.claude/projects/<src_slug>/<uuid>.jsonl
# to <dst_host>'s ~/.claude/projects/<dst_slug>/<uuid>.jsonl, rewriting every
# `"cwd":"<src_cwd...>"` occurrence to point at <dst_cwd...>.
migrate_session() {
    _src=$1; _dst=$2; _uuid=$3; _src_cwd=$4; _dst_cwd=$5
    _src_slug=$(claude_slug "$_src_cwd")
    _dst_slug=$(claude_slug "$_dst_cwd")
    _src_path="\$HOME/.claude/projects/${_src_slug}/${_uuid}.jsonl"
    _dst_path="\$HOME/.claude/projects/${_dst_slug}/${_uuid}.jsonl"

    if is_local "$_src"; then
        _src_data=$(cat "$HOME/.claude/projects/${_src_slug}/${_uuid}.jsonl" 2>/dev/null || true)
    else
        _src_data=$(ssh -o BatchMode=yes -o ConnectTimeout=5 "$_src" "cat $_src_path" 2>/dev/null || true)
    fi
    if [ -z "$_src_data" ]; then
        echo "rclaude: source session not found on $_src ($_src_path)" >&2
        return 1
    fi

    _rewrite_py=$(cat <<'PY'
import json, sys
old, new = sys.argv[1], sys.argv[2]
for line in sys.stdin:
    try:
        e = json.loads(line)
    except Exception:
        sys.stdout.write(line); continue
    cwd = e.get("cwd")
    if isinstance(cwd, str):
        if cwd == old:                e["cwd"] = new
        elif cwd.startswith(old + "/"): e["cwd"] = new + cwd[len(old):]
    sys.stdout.write(json.dumps(e) + "\n")
PY
)
    _rewritten=$(printf '%s' "$_src_data" | python3 -c "$_rewrite_py" "$_src_cwd" "$_dst_cwd") || {
        echo "rclaude: cwd rewrite failed" >&2; return 1; }

    _mkdir="mkdir -p \$HOME/.claude/projects/${_dst_slug}"
    if is_local "$_dst"; then
        sh -c "$_mkdir && cat > $HOME/.claude/projects/${_dst_slug}/${_uuid}.jsonl" <<EOF
$_rewritten
EOF
    else
        ssh -o BatchMode=yes -o ConnectTimeout=5 "$_dst" "$_mkdir && cat > $_dst_path" <<EOF
$_rewritten
EOF
    fi || { echo "rclaude: failed to write to $_dst" >&2; return 1; }
    printf 'rclaude: mirrored session %s → %s (%s)\n' "$(printf %s "$_uuid" | cut -c1-8)" "$_dst" "$_dst_cwd" >&2
}

# Pick a python that has claude_code_batch_sdk importable. Walks 3.13/.12/.11
# then falls back to plain python3. The SDK requires Python 3.11+. Tries each
# candidate with a real `-c "import claude_code_batch_sdk"` so a non-SDK
# install of a newer python doesn't shadow an SDK-equipped older one.
_PICK_PY_SNIPPET='for _p in python3.13 python3.12 python3.11 python3; do _b=$(command -v "$_p" 2>/dev/null) || continue; "$_b" -c "import claude_code_batch_sdk" 2>/dev/null && PY="$_b" && break; done; [ -z "${PY:-}" ] && { echo "rclaude: no python with claude_code_batch_sdk found" >&2; exit 2; }'
_REMOTE_TRIAGE_BOOT='export PATH=$HOME/.local/bin:/opt/homebrew/bin:$PATH; '"$_PICK_PY_SNIPPET"';'

# Keepalive options for interactive ssh -t sessions. Sends a keepalive every
# 30s; tolerates 6 consecutive failures (~3 min of network blip) before the
# transport drops. Pair with `tmux new-session -A` below so a manual reconnect
# (re-running cc/rclaude resume) lands back in the same tmux session — the
# work itself is already protected by tmux on the remote.
_SSH_LIVE_OPTS='-o ServerAliveInterval=30 -o ServerAliveCountMax=6 -o TCPKeepAlive=yes'

# ---------------------------------------------------------------------------
# Setup / dependency auto-install
# ---------------------------------------------------------------------------

# Cache dir for per-host setup markers. A marker file means we've already
# probed + installed deps on that host within RCLAUDE_SETUP_TTL days.
_SETUP_CACHE_DIR=${XDG_CACHE_HOME:-$HOME/.cache}/rclaude
_SETUP_TTL_DAYS=${RCLAUDE_SETUP_TTL:-7}

# Detect package-manager family on <host>. Output: macos | rhel | debian | unknown.
detect_os_on() {
    _h=$1
    _probe='if [ "$(uname -s)" = "Darwin" ]; then echo macos
            elif command -v dnf >/dev/null 2>&1; then echo rhel
            elif command -v apt-get >/dev/null 2>&1; then echo debian
            else echo unknown; fi'
    if is_local "$_h"; then
        sh -c "$_probe" 2>/dev/null
    else
        ssh -o BatchMode=yes -o ConnectTimeout=5 "$_h" "$_probe" 2>/dev/null
    fi
}

# Install <pkgs> on <host> using its native package manager. Uses sudo for
# system pkgs on Linux; brew (no sudo) on macOS. On bootc/Silverblue-style
# immutable systems (signaled by /run/ostree-booted), dnf is given
# `--transient` so the install lands in an overlay that survives until
# reboot — rclaude's per-host marker is invalidated below on reboot so it
# re-installs automatically.
install_pkgs_on() {
    _h=$1; _os=$2; shift 2
    _pkgs=$*
    [ -z "$_pkgs" ] && return 0
    _dnf_flags="-y"
    if [ "$_os" = "rhel" ]; then
        if _probe_on "$_h" 'test -e /run/ostree-booted && echo bootc; :' | grep -q bootc; then
            _dnf_flags="-y --transient"
            printf 'rclaude: %s is bootc/immutable — using --transient overlay\n' "$_h" >&2
        fi
    fi
    case $_os in
        macos)  _cmd="brew install $_pkgs" ;;
        rhel)   _cmd="sudo dnf install $_dnf_flags $_pkgs" ;;
        debian) _cmd="sudo apt-get update && sudo apt-get install -y $_pkgs" ;;
        *)
            echo "rclaude: don't know how to install $_pkgs on $_h ($_os) — do it manually" >&2
            return 1 ;;
    esac
    printf 'rclaude: installing on %s: %s\n' "$_h" "$_pkgs" >&2
    if is_local "$_h"; then
        sh -c "$_cmd" >&2
    else
        ssh -t "$_h" "$_cmd" >&2
    fi
}

# Run a probe command on <host>, return its stdout. Used by setup_host.
_probe_on() {
    _h=$1; _cmd=$2
    if is_local "$_h"; then sh -c "$_cmd" 2>/dev/null
    else ssh -o BatchMode=yes -o ConnectTimeout=5 "$_h" "$_cmd" 2>/dev/null
    fi
}

# Idempotently install rclaude's deps on <host>. Honors a per-host marker so
# we don't re-probe on every invocation. Pass `force` to bypass the marker.
setup_host() {
    _h=$1; _force=${2:-}
    mkdir -p "$_SETUP_CACHE_DIR" 2>/dev/null
    _marker_id=$(printf %s "$_h" | tr -c 'A-Za-z0-9' '_')
    _marker="$_SETUP_CACHE_DIR/setup-$_marker_id"
    if [ "$_force" != "force" ] && [ -f "$_marker" ]; then
        # Marker exists and is recent enough → assume deps are fine.
        if [ -z "$(find "$_marker" -mtime +"$_SETUP_TTL_DAYS" 2>/dev/null)" ]; then
            return 0
        fi
    fi
    _os=$(detect_os_on "$_h")
    if [ "$_os" = "unknown" ] || [ -z "$_os" ]; then
        echo "rclaude: couldn't detect OS on $_h; skipping setup" >&2
        return 0
    fi
    # Probe system binaries. The trailing `; :` guarantees a 0 exit from the
    # remote shell so `set -e` in our caller doesn't kill us when a missing
    # binary's `command -v` returns 1 inside the loop. Newline-delim output;
    # the awk comparison below ignores delimiter shape.
    _missing=""
    _have=$(_probe_on "$_h" 'for c in tmux rsync mosh; do command -v "$c" >/dev/null 2>&1 && echo "$c"; done; :')
    for c in tmux rsync mosh; do
        printf '%s\n' "$_have" | grep -Fxq "$c" || _missing="$_missing $c"
    done
    if [ -n "$_missing" ]; then
        install_pkgs_on "$_h" "$_os" $_missing || true
    fi
    # Python SDK for triage. Try to install per-user without sudo. Same `; :`
    # guard for the same reason.
    _has_sdk=$(_probe_on "$_h" 'for p in python3.13 python3.12 python3.11 python3; do b=$(command -v "$p" 2>/dev/null) || continue; "$b" -c "import claude_code_batch_sdk" 2>/dev/null && echo "$b" && break; done; :')
    if [ -z "$_has_sdk" ]; then
        _pick=$(_probe_on "$_h" 'for p in python3.12 python3.11 python3; do command -v "$p" 2>/dev/null && break; done | head -1')
        if [ -n "$_pick" ]; then
            printf 'rclaude: installing claude-code-batch-sdk via %s on %s\n' "$_pick" "$_h" >&2
            if is_local "$_h"; then
                "$_pick" -m pip install --user --quiet claude-code-batch-sdk >&2 || true
            else
                ssh "$_h" "$_pick -m pip install --user --quiet claude-code-batch-sdk" >&2 || true
            fi
        fi
    fi
    touch "$_marker" 2>/dev/null
}

# Prefer mosh when available on both ends — unless explicitly disabled via
# RCLAUDE_TRANSPORT=ssh. Echoes "mosh" or "ssh". Caches result per host.
pick_transport() {
    _h=$1
    case ${RCLAUDE_TRANSPORT:-auto} in
        ssh) echo ssh; return ;;
        mosh) echo mosh; return ;;
    esac
    if ! command -v mosh >/dev/null 2>&1; then echo ssh; return; fi
    _cache="/tmp/rclaude-transport.$(whoami).$(printf %s "$_h" | tr -c 'A-Za-z0-9' '_')"
    if [ -s "$_cache" ]; then cat "$_cache"; return; fi
    if _probe_on "$_h" 'command -v mosh-server >/dev/null 2>&1' | grep -q . \
       || _probe_on "$_h" 'command -v mosh-server' >/dev/null; then
        echo mosh > "$_cache"; echo mosh
    else
        echo ssh > "$_cache"; echo ssh
    fi
}

# Run the triage helper on <host> with the supplied extra args. Stdout is the
# raw TSV emitted by _claude-triage (one row per session).
list_triage_on() {
    _host=$1
    shift
    _helper_dir=$(dirname "$(resolve_self)")
    _helper="$_helper_dir/_claude-triage"
    [ -f "$_helper" ] || return 0
    if is_local "$_host"; then
        # Probe PATH with Homebrew prefixes (mac) and the user's ~/.local/bin
        # both included, in case the script is invoked from a leaner non-login
        # context (ssh, cron, tmux without env inheritance).
        _orig_path=$PATH
        PATH=$HOME/.local/bin:/opt/homebrew/bin:/usr/local/bin:$PATH
        PY=""
        for _p in python3.13 python3.12 python3.11 python3; do
            _b=$(command -v "$_p" 2>/dev/null) || continue
            "$_b" -c "import claude_code_batch_sdk" 2>/dev/null && PY=$_b && break
        done
        PATH=$_orig_path
        if [ -z "$PY" ]; then
            echo "rclaude: no python with claude_code_batch_sdk found locally" >&2
            return 1
        fi
        "$PY" "$_helper" "$@" 2>/dev/null || true
    else
        _args=""
        for a in "$@"; do
            _args="$_args $(printf %s "$a" | sed 's/"/\\"/g; s/^/"/; s/$/"/')"
        done
        # Stream the helper over stdin so we don't depend on it being
        # pre-installed on the remote.
        ssh -o BatchMode=yes -o ConnectTimeout=5 "$_host" \
            "${_REMOTE_TRIAGE_BOOT} \$PY -${_args}" \
            < "$_helper" 2>/dev/null || true
    fi | awk -F'\t' -v host="$_host" '
        # _claude-triage writes informational lines starting with "# " to
        # stderr; the stdout we capture is pure TSV. Each row:
        # mtime\tuuid\tcwd\tpriority\tstatus\tsummary\tnext_action
        NF >= 7 { printf "%s\ttriage\t%s\t%s\t%s\t%s\t%s\t%s\t%s\n",
                         host, $2, $4, $5, $6, $7, $3, $1 }
    '
}

# Push the canonical session-tools tmux fragment to <host> and ensure
# ~/.tmux.conf sources it. Idempotent; runs on every launch so config changes
# in the repo propagate without re-running install.sh on each host. Silent
# no-op if the repo fragment can't be located.
sync_tmux_conf() {
    _host=$1
    _self=$(resolve_self)
    _repo=$(cd "$(dirname "$_self")/.." 2>/dev/null && pwd)
    _frag="$_repo/tmux.conf"
    [ -f "$_frag" ] || return 0
    _remote_cmd='mkdir -p ~/.tmux.d && cat > ~/.tmux.d/session-tools.conf && { grep -q "session-tools.conf" ~/.tmux.conf 2>/dev/null || printf "source-file ~/.tmux.d/session-tools.conf\n" >> ~/.tmux.conf; } && tmux source-file ~/.tmux.conf 2>/dev/null || true'
    if is_local "$_host"; then
        sh -c "$_remote_cmd" < "$_frag" 2>/dev/null || true
    else
        ssh -o BatchMode=yes -o ConnectTimeout=5 "$_host" "$_remote_cmd" < "$_frag" 2>/dev/null || true
    fi
}

# All hosts to scan for list/resume. Defaults to "apricot plum" so resume
# discovery works symmetrically from either host (the local one is rendered
# as "local" and remote ones are filtered to drop any host that matches the
# current machine).
scan_hosts() {
    printf "local\n"
    for h in ${RCLAUDE_HOSTS:-apricot plum}; do
        is_local "$h" && continue
        printf "%s\n" "$h"
    done
}

# ---------------------------------------------------------------------------
# Subcommands
# ---------------------------------------------------------------------------

cmd_triage() {
    # Pass-through args: --limit, --refresh, --uuids ...
    _opts="$*"
    printf "%-8s  %-8s  %-3s  %-15s  %-50s  %s\n" \
        "HOST" "UUID" "PRI" "STATUS" "SUMMARY" "NEXT ACTION"
    scan_hosts | while IFS= read -r h; do
        # Row format from list_triage_on:
        # host \t triage \t uuid \t priority \t status \t summary \t next_action \t cwd \t mtime
        # shellcheck disable=SC2086
        list_triage_on "$h" $_opts | awk -F'\t' '
            { uuid8 = substr($3, 1, 8)
              printf "%-8s  %-8s  %-3s  %-15s  %-50.50s  %s\n",
                     $1, uuid8, $4, $5, $6, $7 }
        '
    done
}

cmd_list() {
    _mode=${1:-all}   # all | tmux | disk | sessions
    printf "%-10s  %-7s  %-60s  %s\n" "HOST" "KIND" "SESSION/CWD/UUID" "DETAIL"
    scan_hosts | while IFS= read -r h; do
        case $_mode in
            tmux)             list_tmux_on     "$h" ;;
            disk)             list_disk_on     "$h" ;;
            sessions|--sessions)
                              list_tmux_on     "$h"
                              list_sessions_on "$h" ;;
            *)                list_all_on      "$h" ;;
        esac | awk -F'\t' '{
            # Tmux/disk rows: $3 is the display target. Session rows: $3=uuid,
            # $4=snippet (show snippet, abbreviate uuid into DETAIL via $5).
            if ($2 == "session") {
                uuid_short = substr($3, 1, 8)
                detail = (NF >= 5 ? $5 : "") "  [" uuid_short "]"
                printf "%-10s  %-7s  %-60.60s  %s\n", $1, $2, $4, detail
            } else {
                printf "%-10s  %-7s  %-60.60s  %s\n", $1, $2, $3, $4
            }
        }'
    done
}

# Resume strategy:
#   - 1 match                  → attach directly
#   - 2+ matches                → single-key picker (1-9 then a-z, max 35)
#   - matches a tmux row       → ssh+tmux attach (preserves the live conversation)
#   - matches a session UUID   → ssh+tmux+claude --resume <uuid> at recorded cwd
#   - matches a snippet/cwd    → same as session (the row identifies a UUID)
#
# Pattern matching is case-insensitive substring across host/kind/uuid/snippet/cwd.
# An empty pattern lists everything (interactive picker).
cmd_resume() {
    _pattern=""
    _on=""
    while [ $# -gt 0 ]; do
        case $1 in
            --on)     shift; _on=${1:-}; shift ;;
            --on=*)   _on=${1#--on=}; shift ;;
            --all|-a) shift ;;
            *)        _pattern=$1; shift ;;
        esac
    done
    # Triage = Haiku-ranks sessions before display; only useful when browsing
    # without a pattern. Pattern searches always take the cheap path (raw
    # sessions, no LLM) so they return quickly.
    _triage_mode=0
    if [ -z "$_pattern" ]; then
        case ${RCLAUDE_TRIAGE:-off} in
            auto|on|1|true) _triage_mode=1 ;;
        esac
    fi
    _d_total=0; _d_room=0
    if [ "$_triage_mode" = "1" ]; then
        printf 'rclaude: triaging sessions...\n' >&2
        # Collect tmux rows from all hosts first so they always appear in the
        # picker even when triage produces > (35 - tmux_count) rows on a single
        # host that would otherwise crowd them out.
        _tmux=$(scan_hosts | while IFS= read -r h; do list_tmux_on "$h"; done)
        # Triage rows: col 4 = priority, col 9 = mtime. Each host's rows come
        # pre-sorted by priority desc, but the per-host blocks are concatenated
        # so a P5 on apricot would sit after all local rows and get truncated.
        # Re-sort globally by (priority desc, mtime desc) so the top of the
        # picker is the actual highest priority across the fleet.
        _triage=$(scan_hosts | while IFS= read -r h; do list_triage_on "$h"; done \
                  | sort -t"$(printf '\t')" -k4,4n -k9,9nr)
        _t_count=0
        [ -n "$_tmux" ] && _t_count=$(printf '%s\n' "$_tmux" | wc -l | tr -d ' ')
        [ -n "$_triage" ] && _d_total=$(printf '%s\n' "$_triage" | wc -l | tr -d ' ')
        _d_room=$((35 - _t_count))
        [ "$_d_room" -lt 0 ] && _d_room=0
        if [ "$_d_room" -gt 0 ] && [ -n "$_triage" ]; then
            _triage_slice=$(printf '%s\n' "$_triage" | head -n "$_d_room")
        else
            _triage_slice=""
        fi
        if [ -n "$_tmux" ] && [ -n "$_triage_slice" ]; then
            _matches=$(printf '%s\n%s' "$_tmux" "$_triage_slice")
        else
            _matches=${_tmux:-$_triage_slice}
        fi
    elif [ -z "$_pattern" ]; then
        _tmux=$(scan_hosts | while IFS= read -r h; do list_tmux_on "$h"; done)
        _disk_raw=$(scan_hosts | while IFS= read -r h; do list_sessions_on "$h"; done)
        _disk=$(printf '%s\n' "$_disk_raw" | dedupe_sessions)
        _t_count=0
        [ -n "$_tmux" ] && _t_count=$(printf '%s\n' "$_tmux" | wc -l | tr -d ' ')
        [ -n "$_disk" ] && _d_total=$(printf '%s\n' "$_disk" | wc -l | tr -d ' ')
        _d_room=$((35 - _t_count))
        [ "$_d_room" -lt 0 ] && _d_room=0
        if [ "$_d_room" -gt 0 ] && [ -n "$_disk" ]; then
            _disk_slice=$(printf '%s\n' "$_disk" | head -n "$_d_room")
        else
            _disk_slice=""
        fi
        if [ -n "$_tmux" ] && [ -n "$_disk_slice" ]; then
            _matches=$(printf '%s\n%s' "$_tmux" "$_disk_slice")
        else
            _matches=${_tmux:-$_disk_slice}
        fi
    else
        # Pattern search ordering (cheapest → expensive):
        #   1. session display names (~/.claude/sessions/*.json) — fast: one
        #      bounded python scan per host, hits sessions named via `claude -n`
        #   2. first-user-message snippets + cwd — cheap row-grep
        #   Fallback (only if both empty): full-transcript grep over every jsonl
        _name_rows=$(scan_hosts | while IFS= read -r h; do name_search_on "$h" "$_pattern"; done)
        _cheap_all=$(scan_hosts | while IFS= read -r h; do list_search_on "$h"; done)
        _cheap_rows=$(printf '%s\n' "$_cheap_all" | grep -F -i -- "$_pattern" || true)
        _matches=$(printf '%s\n%s\n' "$_name_rows" "$_cheap_rows" | grep -v '^$' || true)
        _tmux_part=$(printf '%s\n' "$_matches" | awk -F'\t' '$2=="tmux"')
        _disk_part=$(printf '%s\n' "$_matches" | awk -F'\t' '$2!="tmux"' | dedupe_sessions)
        if [ -n "$_tmux_part" ] && [ -n "$_disk_part" ]; then
            _matches=$(printf '%s\n%s' "$_tmux_part" "$_disk_part")
        else
            _matches=${_tmux_part:-$_disk_part}
        fi
        if [ -z "$_matches" ]; then
            printf 'rclaude: no name/snippet hits; searching full transcripts...\n' >&2
            _matches=$(scan_hosts | while IFS= read -r h; do deep_search_on "$h" "$_pattern"; done | dedupe_sessions)
        fi
    fi
    _count=0
    [ -n "$_matches" ] && _count=$(printf '%s\n' "$_matches" | wc -l | tr -d ' ')
    if [ "$_count" -eq 0 ]; then
        echo "no matching sessions${_pattern:+ for pattern '$_pattern'}" >&2
        exit 1
    fi
    if [ "$_count" -gt 1 ]; then
        _keys="123456789abcdefghijklmnopqrstuvwxyz"
        # Append a trailing name column (host+uuid → display name from
        # ~/.claude/sessions/*.json). Empty for tmux rows and for sessions
        # with no `claude -n` label.
        _name_map=$(build_name_map)
        _matches=$(printf '%s\n' "$_matches" | awk -F'\t' -v OFS='\t' -v map="$_name_map" '
            BEGIN {
                n = split(map, lines, "\n")
                for (i=1; i<=n; i++) {
                    split(lines[i], f, "\t")
                    if (f[1] && f[2]) names[f[1] SUBSEP f[2]] = f[3]
                }
            }
            { nm = ($2=="tmux") ? "" : (($1 SUBSEP $3) in names ? names[$1 SUBSEP $3] : "")
              print $0, nm }
        ')
        if [ "$_count" -gt 35 ]; then
            _orig_count=$_count
            _matches=$(printf '%s\n' "$_matches" | head -n 35)
            _count=35
            printf 'rclaude: %s matches; showing 35 most recent (refine with a pattern to see others)\n' "$_orig_count" >&2
        fi
        # ANSI colors (only when stderr is a tty). Conservative palette —
        # host cyan, tmux marker bold-green, priority red/yellow, statuses
        # colored, uuid8 dimmed, key bracket bold-magenta.
        if [ -t 2 ]; then
            _R=$(printf '\033[0m')
            _Chost=$(printf '\033[36m'); _Ctmux=$(printf '\033[1;32m')
            _Cdim=$(printf '\033[2m');   _Ckey=$(printf '\033[1;35m')
            # Triage uses P0=critical / P4=abandonable (P0 incident convention).
            # _Cp5 / _Cp4 names are kept for diff size; what they color is the
            # *top two* priority levels, whatever the scale is.
            _Cp5=$(printf '\033[1;31m'); _Cp4=$(printf '\033[33m')
            _Cblk=$(printf '\033[31m');  _Cwait=$(printf '\033[33m')
            _Cinp=$(printf '\033[36m');  _Cdone=$(printf '\033[32m')
        else
            _R=; _Chost=; _Ctmux=; _Cdim=; _Ckey=
            _Cp5=; _Cp4=; _Cblk=; _Cwait=; _Cinp=; _Cdone=
        fi
        # Kind column dropped — it carried no signal when all rows were the
        # same kind. Kind is now encoded by row shape: tmux has a ▶ marker,
        # triage shows P<n> + status, session shows the snippet plain.
        _fmt_row='
            function prio_c(p) { if (p=="0") return c_p5; if (p=="1") return c_p4; return "" }
            function stat_c(s) {
                if (s=="blocked")          return c_blk
                if (s=="waiting_on_user")  return c_wait
                if (s=="in_progress")      return c_inp
                if (s=="done")             return c_done
                return ""
            }
            # Last two path components of cwd, e.g. "@projects/@lilith".
            function last2(cwd,    n, parts) {
                n = split(cwd, parts, "/")
                if (n == 0) return ""
                if (n == 1) return parts[1]
                return parts[n-1] "/" parts[n]
            }
            # Heuristic recovery of cwd from a tmux session name like
            # "claude-<user>-<slug>-<epoch>". Lossy (@ became -) but
            # readable for the common cases.
            function tmux_dir(name) {
                sub(/^claude-[^-]+-/, "", name)
                sub(/-[0-9]+$/, "", name)
                gsub(/--/, "/", name)
                return last2(name)
            }
            function dir_label() {
                if ($2 == "tmux")    return tmux_dir($3)
                if ($2 == "triage")  return last2($8)
                if ($2 == "session") { split($5, h, " · "); return last2(h[1]) }
                return ""
            }
            function fit(s, n) { return length(s) > n ? substr(s, 1, n-1) "…" : s }
            function display() {
                if ($2 == "tmux")
                    return c_tmux "▶ " r $3
                if ($2 == "triage")
                    return prio_c($4) "P" $4 r " " stat_c($5) sprintf("%-15s", $5) r " " $6 "  " c_dim "[" substr($3,1,8) "]" r
                if ($2 == "session")
                    return $4 "  " c_dim "[" substr($3,1,8) "]" r
                return $3
            }
            {
                printf "%s%-10s%s  %s%-22s%s  %s", c_host, $1, r, c_dim, fit(dir_label(), 22), r, display()
            }
        '
        if [ ! -t 0 ] || [ ! -t 2 ]; then
            echo "multiple matches and no tty for picker; refine pattern:" >&2
            printf '%s\n' "$_matches" | awk -F'\t' \
                -v r="$_R" -v c_host="$_Chost" -v c_tmux="$_Ctmux" -v c_dim="$_Cdim" \
                -v c_p5="$_Cp5" -v c_p4="$_Cp4" \
                -v c_blk="$_Cblk" -v c_wait="$_Cwait" -v c_inp="$_Cinp" -v c_done="$_Cdone" \
                "$_fmt_row"'{printf "\n"}' >&2
            exit 1
        fi
        _i=0
        _prev_kind=""
        printf '%s\n' "$_matches" | while IFS= read -r _line; do
            _i=$((_i + 1))
            _kind_now=$(printf %s "$_line" | awk -F'\t' '{print $2}')
            if [ "$_prev_kind" = "tmux" ] && [ "$_kind_now" != "tmux" ]; then
                printf '  %s---%s\n' "$_Cdim" "$_R" >&2
            fi
            _k=$(printf %s "$_keys" | cut -c"$_i")
            _row_text=$(printf %s "$_line" | awk -F'\t' \
                -v r="$_R" -v c_host="$_Chost" -v c_tmux="$_Ctmux" -v c_dim="$_Cdim" \
                -v c_p5="$_Cp5" -v c_p4="$_Cp4" \
                -v c_blk="$_Cblk" -v c_wait="$_Cwait" -v c_inp="$_Cinp" -v c_done="$_Cdone" \
                "$_fmt_row")
            printf '  %s[%s]%s  %s\n' "$_Ckey" "$_k" "$_R" "$_row_text" >&2
            _prev_kind=$_kind_now
        done
        if [ "$_d_total" -gt "$_d_room" ] && [ "$_d_room" -gt 0 ]; then
            printf '  %s(showing %s most recent of %s disk sessions; pass a pattern to search older)%s\n' \
                "$_Cdim" "$_d_room" "$_d_total" "$_R" >&2
        fi
        _last_key=$(printf %s "$_keys" | cut -c"$_count")
        printf '%sselect [1-%s] (q to cancel):%s ' "$_Ckey" "$_last_key" "$_R" >&2
        _old=$(stty -g 2>/dev/null || true)
        stty -icanon -echo min 1 time 0 2>/dev/null || true
        _key=$(dd bs=1 count=1 2>/dev/null </dev/tty || true)
        [ -n "$_old" ] && stty "$_old" 2>/dev/null || true
        # Render the keystroke we just consumed. Empty (EOF), Enter, Esc, q,
        # and Ctrl-C all mean "cancel" — just exit cleanly.
        case $_key in
            ''|q|Q|$(printf '\r')|$(printf '\n')|$(printf '\033')|$(printf '\003'))
                printf '(cancelled)\n' >&2
                exit 0
                ;;
        esac
        printf '%s\n' "$_key" >&2
        _idx=0
        _c=1
        while [ "$_c" -le "$_count" ]; do
            if [ "$(printf %s "$_keys" | cut -c"$_c")" = "$_key" ]; then
                _idx=$_c; break
            fi
            _c=$((_c + 1))
        done
        if [ "$_idx" -eq 0 ]; then
            echo "rclaude: invalid selection: '$_key' (expected 1-${_last_key})" >&2
            exit 1
        fi
        _matches=$(printf '%s\n' "$_matches" | sed -n "${_idx}p")
    fi
    _host=$(printf '%s\n' "$_matches" | awk -F'\t' 'NR==1{print $1}')
    _kind=$(printf '%s\n' "$_matches" | awk -F'\t' 'NR==1{print $2}')
    _target=$(printf '%s\n' "$_matches" | awk -F'\t' 'NR==1{print $3}')
    # cwd column depends on kind:
    #   session  → col 5, formatted "<cwd> · <rel-time>"
    #   triage   → col 8, raw cwd path
    case $_kind in
        triage)  _session_cwd=$(printf '%s\n' "$_matches" | awk -F'\t' 'NR==1{print $8}') ;;
        session) _session_cwd=$(printf '%s\n' "$_matches" | awk -F'\t' 'NR==1{print $5}' | awk -F' · ' '{print $1}') ;;
        *)       _session_cwd="" ;;
    esac
    case $_kind in
        tmux)
            if [ -n "$_on" ] && [ "$_on" != "$_host" ]; then
                echo "rclaude: --on can't migrate a live tmux session; detach + retry, or omit --on" >&2
                exit 1
            fi
            if is_local "$_host"; then
                exec tmux attach -t "$_target"
            else
                setup_host "$_host"
                if [ "$(pick_transport "$_host")" = "mosh" ]; then
                    exec mosh "$_host" -- tmux attach -t "$_target"
                fi
                exec ssh -t $_SSH_LIVE_OPTS "$_host" tmux attach -t "$_target"
            fi
            ;;
        disk)
            if [ -n "$_on" ] && [ "$_on" != "$_host" ]; then
                echo "rclaude: --on requires a specific session row (run 'rclaude resume <pattern>' to get one, not a project-level row)" >&2
                exit 1
            fi
            # Spawn tmux + claude --continue at the recorded cwd.
            RCLAUDE_RESUME=1 exec "$0" "$_host" "$_target"
            ;;
        session|triage)
            # Spawn tmux + claude --resume <uuid> at the session's recorded cwd.
            if [ -z "$_session_cwd" ]; then
                echo "rclaude: session $_target has no recorded cwd" >&2
                exit 1
            fi
            _dst=${_on:-$_host}
            if [ "$_dst" = "$_host" ] || { is_local "$_dst" && is_local "$_host"; }; then
                RCLAUDE_RESUME_ID=$_target exec "$0" "$_host" "$_session_cwd"
            fi
            # Cross-host mirror: translate cwd via $HOME-relative mirror,
            # copy JSONL with cwd rewritten, then launch on dst.
            _src_home=$(get_home "$_host")
            _dst_home=$(get_home "$_dst")
            if [ -z "$_src_home" ] || [ -z "$_dst_home" ]; then
                echo "rclaude: couldn't resolve \$HOME on $_host or $_dst" >&2
                exit 1
            fi
            case $_session_cwd in
                "$_src_home")    _dst_cwd=$_dst_home ;;
                "$_src_home"/*)  _dst_cwd="$_dst_home${_session_cwd#$_src_home}" ;;
                *)
                    echo "rclaude: session cwd $_session_cwd is outside source \$HOME ($_src_home); can't mirror" >&2
                    exit 1 ;;
            esac
            migrate_session "$_host" "$_dst" "$_target" "$_session_cwd" "$_dst_cwd" || exit
            # Pass src + src_cwd to the launch path so it can rsync the project
            # tree if the dst dir doesn't exist (set RCLAUDE_MIGRATE_SYNC=none
            # to skip and just mkdir).
            RCLAUDE_MIGRATE_FROM=$_host RCLAUDE_MIGRATE_FROM_CWD=$_session_cwd \
                RCLAUDE_RESUME_ID=$_target \
                exec "$0" "$_dst" "$_dst_cwd"
            ;;
    esac
}

# ---------------------------------------------------------------------------
# Dispatch
# ---------------------------------------------------------------------------

cmd_version() {
    _self=$(resolve_self)
    _repo=$(cd "$(dirname "$_self")/.." 2>/dev/null && pwd)
    if [ -d "$_repo/.git" ] && command -v git >/dev/null 2>&1; then
        _sha=$(git -C "$_repo" rev-parse --short HEAD 2>/dev/null)
        _dirty=""
        [ -n "$(git -C "$_repo" status --porcelain 2>/dev/null)" ] && _dirty="-dirty"
        _date=$(git -C "$_repo" log -1 --format=%cd --date=short HEAD 2>/dev/null)
        printf 'rclaude (session-tools) %s%s  %s  %s\n' "$_sha" "$_dirty" "$_date" "$_repo"
    else
        printf 'rclaude (session-tools)  %s\n' "$_repo"
    fi
}

cmd_setup() {
    # Args:
    #   (none)                    → install on every host in scan_hosts
    #   <host> [<host>...]        → install on each named host
    #   --on <host>               → install on a single host (parity with `resume --on`)
    _hosts=""
    while [ $# -gt 0 ]; do
        case $1 in
            --on)   shift; _hosts="$_hosts $1"; shift ;;
            --on=*) _hosts="$_hosts ${1#--on=}"; shift ;;
            *)      _hosts="$_hosts $1"; shift ;;
        esac
    done
    if [ -z "$_hosts" ]; then
        scan_hosts | while IFS= read -r h; do setup_host "$h" force; done
    else
        for h in $_hosts; do setup_host "$h" force; done
    fi
}

case ${1:-} in
    list)             shift; cmd_list    "$@"; exit ;;
    resume)           shift; cmd_resume  "$@"; exit ;;
    triage)           shift; cmd_triage  "$@"; exit ;;
    setup|install)    shift; cmd_setup   "$@"; exit ;;
    -v|--version)     cmd_version; exit ;;
    -h|--help|help)   cmd_help; exit ;;
esac

# ---------------------------------------------------------------------------
# Default behavior: launch (or reattach to) a session.
# ---------------------------------------------------------------------------

# Argument resolution:
#   `rclaude`        → local, $PWD
#   `rclaude .`      → local, $PWD
#   `rclaude <host>` → host, default dir (~ remote, $PWD local)
#   `rclaude <host> <dir>` → host, dir (with `.` resolving to $PWD)
if [ $# -eq 0 ] || [ "${1:-}" = "." ]; then
    host=local
    dir=$PWD
else
    host=$1
    dir=${2:-}
fi

# Defaults + `.` expansion now that we know whether we're local or remote.
if is_local "$host"; then
    case ${dir:-.} in
        .|"") dir=$PWD ;;
    esac
else
    # Remote default: mirror local $PWD relative to $HOME onto the remote's
    # $HOME. Same behavior for omitted dir or explicit `.`. Falls back to
    # remote $HOME if local $PWD isn't under $HOME.
    if [ "$dir" = "." ] || [ -z "$dir" ]; then
        case $PWD in
            "$HOME")     dir=\~ ;;
            "$HOME"/*)   _rel=${PWD#"$HOME"/}; dir="~/$_rel" ;;
            *)           dir=\~ ;;
        esac
    fi
fi

slug=$(printf %s "$dir" | sed -e 's|^[~/]*||' -e 's|[^A-Za-z0-9]|-|g')
[ -z "$slug" ] && slug=home
session="claude-$(whoami)-${slug}-$(date +%s)"

perms=${RCLAUDE_PERMS:-bypass}
case $perms in
    bypass) flag="--dangerously-skip-permissions" ;;
    *)      flag="--permission-mode $perms" ;;
esac

# Inner command for the tmux pane. If claude exits nonzero OR ends in under
# 2 seconds (usually a misconfig: missing dir, locked session, crashed
# claude), the pane stays open with the exit code visible instead of
# silently dying and dragging the whole tmux session + ssh transport down
# with it. A real interactive session lasts much longer than 2s, so a clean
# /exit closes the pane normally.
build_inner() {
    # Single-line, single-quote-safe. Variables prefixed with rc_ to avoid
    # collision with anything in the user's shell.
    #
    # Note: launch path uses plain `claude` (fresh session). Each invocation
    # creates a new uniquely-named tmux session. Reattach to a live session
    # via `rclaude resume <pattern>`; disk-resume after host death likewise.
    _resume_flag=""
    if [ -n "${RCLAUDE_RESUME_ID:-}" ]; then
        _resume_flag="--resume ${RCLAUDE_RESUME_ID}"
    elif [ "${RCLAUDE_RESUME:-0}" = "1" ]; then
        _resume_flag="--continue"
    fi
    printf '%s' \
        "cd ${1} && rc_t=\$(date +%s); claude ${_resume_flag} ${flag}; rc_ec=\$?; " \
        "rc_e=\$(date +%s); rc_d=\$((rc_e - rc_t)); " \
        "if [ \$rc_ec -ne 0 ] || [ \$rc_d -lt 2 ]; then " \
        "printf '\\n[rclaude] claude exited in %ds with code %d\\n' \$rc_d \$rc_ec; " \
        "printf '[rclaude] press enter to close pane (or Ctrl-b d to detach)... '; " \
        "read rc_; fi"
}

if is_local "$host"; then
    if ! command -v tmux >/dev/null 2>&1; then
        echo "rclaude: tmux not installed locally — install via 'brew install tmux' (macOS) or your package manager" >&2
        exit 1
    fi
    if ! cd "$dir" 2>/dev/null; then
        echo "rclaude: local directory not found: $dir" >&2
        exit 1
    fi
    sync_tmux_conf local
    exec tmux new-session -s "$session" "$(build_inner "$dir")"
fi

# Remote: pre-flight the directory so a typo or missing path fails loudly
# here instead of silently killing the tmux pane and closing the ssh
# transport (which looks like a generic 'Connection closed' to the user).
#
# Cross-host mirror exception: when invoked via `resume --on`, we've just
# migrated the session JSONL but the project files may not exist on the
# target. In that case auto-mkdir so the conversation can be resumed; the
# user can sync project files separately (rsync / git clone). The session
# state is what matters most for resume.
if ! ssh -o BatchMode=yes -o ConnectTimeout=5 "$host" "test -d ${dir}" 2>/dev/null; then
    if [ -n "${RCLAUDE_RESUME_ID:-}" ] && [ -n "${RCLAUDE_MIGRATE_FROM:-}" ]; then
        # Cross-host mirror landing: try to rsync the project tree from
        # source to dst so claude has the files it expects. Falls back to
        # mkdir-only when sync is disabled or rsync fails. Both endpoints
        # being remote is unsupported (no two-hop relay).
        _sync_mode=${RCLAUDE_MIGRATE_SYNC:-rsync}
        _src_host=$RCLAUDE_MIGRATE_FROM
        _src_dir=$RCLAUDE_MIGRATE_FROM_CWD
        _did_rsync=0
        if [ "$_sync_mode" = "rsync" ] && command -v rsync >/dev/null 2>&1; then
            _src_local=0; _dst_local=0
            is_local "$_src_host" && _src_local=1
            is_local "$host"      && _dst_local=1
            if [ $((_src_local + _dst_local)) -ge 1 ]; then
                _src_arg=$([ "$_src_local" = 1 ] && printf '%s/' "$_src_dir" || printf '%s:%s/' "$_src_host" "$_src_dir")
                _dst_arg=$([ "$_dst_local" = 1 ] && printf '%s/' "$dir"      || printf '%s:%s/' "$host"      "$dir")
                printf 'rclaude: rsync -ahz --info=progress2,stats1 %s %s\n' "$_src_arg" "$_dst_arg" >&2
                # -h human-readable, -z compress over ssh, progress2 = single
                # rolling progress bar with rate + ETA, stats1 = summary at end.
                if rsync -ahz --info=progress2,stats1 "$_src_arg" "$_dst_arg" >&2; then
                    _did_rsync=1
                else
                    echo "rclaude: rsync failed; falling back to empty mkdir" >&2
                fi
            fi
        fi
        if [ "$_did_rsync" = 0 ]; then
            echo "rclaude: $dir doesn't exist on $host — creating empty dir for session resume." >&2
            echo "  (sync separately if needed: rsync -a $_src_dir/ $host:$dir/)" >&2
            ssh -o BatchMode=yes -o ConnectTimeout=5 "$host" "mkdir -p ${dir}" 2>/dev/null || {
                echo "rclaude: mkdir failed on $host: $dir" >&2; exit 1; }
        fi
    else
        echo "rclaude: directory not found on $host: $dir" >&2
        case $dir in
            *@proj/*|*@apps/*|*@pkg/*)
                echo "  hint: '@proj/@apps/@pkg' are Claude-instruction aliases, not real shell paths." >&2
                echo "  See ~/.claude/instructions/project-paths.md for the real ~/Code/<bucket>/<project> mapping." >&2
                ;;
        esac
        exit 1
    fi
fi

setup_host "$host"
sync_tmux_conf "$host"
inner=$(build_inner "$dir")
# `new-session -A` attaches if a session of that name already exists, so
# re-running rclaude after a broken pipe lands you back in the same tmux
# session instead of erroring with "duplicate session". Combined with
# _SSH_LIVE_OPTS this tolerates short network drops without losing work.
# Mosh is preferred when available (handles sleep/roam/long blips natively);
# falls back to ssh+keepalives otherwise.
if [ "$(pick_transport "$host")" = "mosh" ]; then
    exec mosh "$host" -- tmux new-session -A -s "${session}" "${inner}"
fi
exec ssh -t $_SSH_LIVE_OPTS "$host" "tmux new-session -A -s '${session}' \"${inner}\""